V R Wooden Industries

We're Here to Help You!

Call : +91-9879055532, +91-9825106311, +91-079-65121575




Construction Designs



Stringer Design :

<b><big><center>Stringer Design :</center></big></b>

Block Design :

<b><big><center>Block Design :</center></big></b>
Features :
  • Bottom Deck Board : Assembly of deckboards comprising the lower, load bearing surfact of the pallet.
  • Deck Spacing : Distance between adjacent deckboards.
  • Lead Board : First board of the pallet.
  • Top Deck Board : Assembly of deckboards comprising the upper surface of the pallet.
  • Overall Height : The vertical distance measured from the floor to the top side of the top deck.
  • Length : Refer to the stringer or stringerboard (in block pallets) length.
  • Width : Refer to the width of the board.
  • Stringer : Continuous, longitudinal, solid or notched beam-component of the pallet used to support deck components, often identified by location as the outside or center stringer.
  • Block : Rectangular, square or cylindrical deck spacer, often identified by its location within the pallet as corner block, edge block, inner block, center or middle blocks.
  • Notch for 4 Ways Entry : Cutout in lower portion of the stringer to allow entry for the fork tine, (partial four-way entry).
  • Opening Height : The vertical distance measured between decks, from floor to the underside of the top deck, or from the floor to the top of the stringer notch.